Why Does My Rolls Royce Phantom Key Fob Not Work?
The Rolls-Royce Phantom is a luxury car that symbolizes prestige and wealth. The large waterfall grille as well as classic upright proportions are instantly recognizable. It is also among the world's most expensive cars.
A rolls royce phantom fob could not function due to a variety of reasons. A dead coin battery is the most common cause, but other causes include water damage or receiver modules.
Battery
The most common reason for a Rolls-Royce Phantom key fob not working is the dead battery inside. However, it is important to note that the key fob may stop working due to a variety of reasons such as damaged buttons, water damage, bad battery contact, signal interference, or unpaired keys requiring changing the program. If the key fob ceases functioning, you may need to speak with locksmith. A locksmith can diagnose the problem quickly and provide the solution quickly.
It is important to protect the battery from dirt and moisture in order to ensure it remains fully functional. It is therefore recommended that you purchase a waterproof case for your key fob whenever driving. It is also advisable to remove battery from key fob prior to cleaning or washing it. Furthermore, the chip inside the key fob is sensitive to water and shouldn't be exposed to salty or soapy water. If the key fob is vulnerable to exposure to water, use isopropyl ethanol or an electronic cleaner to prevent water damage.
The battery pack of the Phantom EE is a unique power system with several technological innovations. This sets it apart from other luxury vehicles powered by traditional power systems. A "power reserve dial" for instance is now incorporated into the dashboards to inform the driver of the car's current energy state. This is a new design element intended to challenge the established models of car design and highlight the potential of alternative drivetrain technologies.
This electric powertrain has the benefit of allowing charging without a physical connection between car and charging station. This is achieved through induction, a method that involves the transfer of power over two surfaces: an induction pad on the ground and a power-transfer module under the battery pack.
The process of recharging is carried out in two phases, resulting in the capacity to charge total of 71kWh. Each phase has a capacity 13.5kW. This makes it the biggest passenger car battery in the world. The Phantom EE also comes with three different chargers that can be used for both single-phase or 3-phase charging as well as Regenerative braking.
Contacts
If your Rolls Royce Phantom key fob has stopped working, it could be due to a dead battery or worn buttons, or any other causes. The issue is usually easy to solve. You could also try reprogramming the key fob or replacing the 12 volt battery. If the issue continues, the receiver module may be defective. The remote keyless system and other electronic components onboard make use of the receiver module to communicate with each other using radio signals. If the receiver module develops a fault and stops communicating with the key fob as well as other electronic components onboard.
If you're having problems with your key fob, ensure that the battery contacts are dry and clean. The metal clips that hold the button-cell battery in place and complete the circuit could be damaged by water or dirty hands. If the battery is old, you should replace it with a brand new one that is the same voltage and size. If you replace the battery, make sure to wash the contact surfaces with rubbing alcohol or electronic cleaner prior to reassembling the key fob.
The key fob in the Rolls Royce Phantom is equipped with an electronic chip that sends signals to the remote keyless system receiver module. This module then translates the signals into commands the car can understand and then act upon. This is how your car can tell that you want to unlock the doors or retract the famous "flying lady" ornament on the hood into the grille.
If the key fob is exposed to water you should remove it immediately from the vehicle. Cleanse the electronic chip using electronic cleaner or isopropyl. If you don't take this step the chip could become damaged.
Water damage
The key fob is constructed with rubber seals to prevent the electronic chip inside from being exposed to water. This makes it impervious to splashes and light rain but not the type of deep water immersion that could be experienced when you drop your key in a puddle or drop it in the ocean. If the fob is wet, the chip may be damaged. It is necessary to replace it.
You can still salvage your key fob from the roll royce even if it's been affected by a dog's urine, washing machine, or soapy handwashing. You can save money by following simple steps.
It is recommended to first disassemble the key fob, then thoroughly dry it. Take the battery off when you can, and make use of compressed air to blow any excess moisture out of the key fob. After you've done this, let it dry for a few days before using it.
If your key fob is susceptible to soaking by moisture, it's a good idea purchase a waterproof case which can shield it from damage. It's also a good idea to keep an extra key in the case so that you don't have to wait for the fob to dry out.
In some instances the Rolls Royce Phantom key fob might stop working due to interference or a dead 12 volt battery. This problem is usually caused by objects, poor weather conditions or transmitters that operate in the same frequency band as your remote.
Keep your key fob away from these sources. If you can't get rid of these sources of interference it is possible to relocate your car to a different location or reprogram the remote. If rolls royce car key TheKeyLab are unable to fix the issue yourself it is recommended to seek out an expert technician. They will be able to identify the problem and determine if it's an electrical or mechanical issue.
Reprogramming
The key fob that you have in your Rolls Royce Phantom is an important component of the security system of your vehicle. It transmits commands to the receiver module, which transmits them to the vehicle's central locking mechanism. If the key fob ceases to function and is not working, it can be a costly and frustrating issue. There are a few simple ways to get your key fob working again.
The first thing to determine is whether the battery in the key fob is dying. This is a common reason for Phantom key fobs that are not locking or unlocking. There are typically signs of degradation, such as the decrease in range. Replace the battery with a fresh one that is the same size, voltage, and specification. Make sure that the metal clips that secure the batteries are not loose.
Another possible cause is water damage. The key fob comes with rubber seals that block water from getting to the chip inside, but if it gets soaked in salty or soapy water, the seals might be damaged. If this happens, remove the battery and clean it using isopropyl alcohol or an electronic cleaner. Then, dry it thoroughly before putting it back in the fob.
If the key fob still does not work, it could be a sign that the receiver module has been faulty. The best way to diagnose this is to connect an electronic diagnostic scanner to the OBD port located under the dashboard of your Phantom. The scanner will ask information about your vehicle like the year, model and type. You will also need to enter the code for your key fob.
Another possibility is signal interference. It could be caused by weather conditions, objects or transmitters that operate on the same frequency. The remote control will still work when you're close to the Phantom however it will not lock or unlock from a distance. You can resolve this issue by removing any obstructions that could be blocking the signal, or by moving the Phantom away from the transmitters.